/
PC Linkly Installation

PC Linkly Installation

Owned by Sandra Petrovic
Last updated: Jun 26, 2025

Setup required before pairing with I8 POS

  • Go to this URL Software Downloads - Linkly

  • Download this Standard Install

    image-20250626-001023.png

  • Follow these instructions to set up the device (Please make sure you have your Linkly ID and Password from your bank)
    https://www.linkly.com.au/storage/app/media/resources/PC5422_Linkly_IP-Communications-Gateway-Installation-Guide_v2.01_V2.0.pdf

  • Once the above steps are complete, you are ready to connect to I8 POS

 

I8 POS Configuration settings

  • Find this icon in your PC application panel to open an application called 'Linkly Client GUI”

    image (2).jpeg

     

  • In this app you can find the details you need to enter into the Indigo8 POS.
    eg.
    - Client IP Address
    - Port Number (2011 is likely the appropriate port to set it to on the Linkly Client GUI)
    - Merchant ID
    - Terminal ID

    Client IP Address can be found here, along with the Port Number

image-20250626-001446.png

The rest of the information needed can be found by following these steps:
- Open Ctrl Panel

image.png

- Journal

image (1).png

  • In the Indigo8 POS Settings
    Tax and Payments → Card Payments
    Select ‘Use Linkly Integration’
    And enter the Client IP Address, Port Number, Merchant ID, Terminal ID into the Indigo8 POS Settings

image (3).png

  • Turn on Integration for the card payments, then SAVE

image (4).png


Your Linkly Integration is now complete.